WITIMSEL STN SERIES 30W/50W/70W SOLAR LED STREET LIGHT

Solar panel, LED lamp, Battery and Controller all –in-one design.
Adopt die-casting technology, UV resistant powder coat finish.
The angle of lamp can be adjustable, apply to the sunshine from different direction
The LED module can be adjustable, ensure the light shining to the ground.
LUMILEDS 5050 LED210Lm/W CRI>70
Motion sensor and time control intelligent mode available.
Automatically turn on and off according to brightness, the brightness in different time schedule set by remote.
Integrated monocrystalline silicon solar panel, with more than 2000 cycles lifespan LiFePO4 battery.
High charging efficiency MPPT controller
Operating Temperature -20°C~+50° C（The battery will stop charging when ambient temperature less than 0°C）
Optical Lens: High light transmittance PC, anti-UV and flame resistant.
IP 65 rated.
Various mounting parts, suitable for different applications

Product Feature

STN is a series of small to medium-power Solar Street Lights with an all-in-one design that is both

practical and aesthetically pleasing. The solar panels are made from power station level

photovoltaic panels, providing higher photoelectric conversion efficiency and Important materials

have UL certification.

Pre-installation checks & tests

Please make sure you conduct these tests and checks before mounting the solar light.

Remove the security plug from the remote control.
Press the ON/OFF button on the remote control.
Check that the red indicator light within the sensor is illuminated.
If the red indicator light within the sensor is not illuminated, cover the panel and check if the solar light turns on (normally within 1 minute).

Installation:

Using the dedicated tool to assemble the light body and the mounting accessories, adjust the light fixture and LED module to the suitable angle.
Install the light to the round pole, square pole or wall, tighten the screws and the nuts when fixed.
3.Make sure the switch was pressed after installed.